[Quick Note] Demo/experimental source code and builds at relevant repos at github: https://github.com/oshablue?tab=repositories [specifics and details below] Integration (Or First Tests) How to start working with the hardware, and what you might want to be able to start talking with it. The hardware will arrive already programmed, at least enough to get started with key …
Category Archives: Ultrasonics
HDL-0108-RSCPT: Q&A Pt 2 [Quasi Transcript]
HDL-0108-RSCPT: Q&A Pt 1 [Quasi Transcript]
HDL-0108-RSCPT: Rapid-Scan 8-Channel Hardware
Key Benefits DLITE-style waveforms to keep data processing across all systems and platforms more uniform. Everything you need to integrate into your software and data work flow. Functional demo firmware[s] (there are two firmware targets on the board) for both out of the box functionality and templates for customization. See below. Functional demo desktop App …
Continue reading “HDL-0108-RSCPT: Rapid-Scan 8-Channel Hardware”
DL0102GXN: Verify and Repair After Likely Over-Voltage
IF2C: G(XN)-Hosted Continuous Acquisition
What about using the DL0102G/XN (the “G” and “GXN”) with or without the IF2C in Continuous Acquisition mode in your UT software? In Brief: Yes.
IF2C: Rapid Scan?
In Brief: The solid state solution is good for rapid scan. As shipped and by design (use-case: low power, long intervals between readings), the communications overhead would make the channel-change scan rate very slow. With a few tiny and easy firmware revisions on the host you could probably speed that up for immediate experimentation.
IF2C: Communications Options
When Hosting the IF2C with a DL0102G/XN, the communications options include the standard DLITE Family comms options, except for a modification to the USB-Serial connectivity. Tested USB Demo R&D Option With the IF2C/G/XN stack, you have the option, for R&D purposes and ease of swapping testing rigs, measuring current, etc., to power from a battery …
IF2C: Command Set, API, Code Examples
There are two (2) APIs of interest here: API for the DL-Host that talks to the IF2C, for example the DL0102GXN as a host, as provided in sample firmware. This is covered here. API for the IF2C accessory itself. A simple communications example is here.
(H)DL/DLITE Family Communications Options
Examples include: LoRaWan, Cellular, Bluetooth, Power-over-Ethernet (PoE), 900MHz long range mesh, 2.4GHz dense mesh, wirelessHART implemented on 802.15.4 modules, WiFi, Ethernet 10/100, point-to-point, PTMP, USB-Serial…