Software programming tools and the programming cable with an adapter, if needed, are used to update the firmware on the DL and HDL family hardware.
Category Archives: HDL-0108-RSCPT 8-Chan Mod Rapid Scan
HDL-0108-RSCPT: Batch Capture and Sample Rate
References In the DacqMan code repository please see the README file for the Custom User Batch Output and search for the paragraphs regarding sample rate. See also: capture-options.json, as well as relevant code in the source. The comments in this post are a summary of the details in the source code and configuration files in …
Continue reading “HDL-0108-RSCPT: Batch Capture and Sample Rate”
Exact Tx-Rx Timing in DL-Family Hardware
Examples of how to assess and change transmit pulse and receive signal timing in the DLITE0100A1 firmware. This is a “flash” post: very quick, draft. You can also probe signals, both digital and analog, at various points on the hardware to get a real-world assessment. Nominally, the Rx Delay implementation has an offset and scale …
DL0100A1 vs RS8 vs RS104: Comparison
These two 8-Channel and 1 4-Channel ultrasonic (UT) pulser-receivers for non-destructive testing (NDT) boards share several characteristics and also target very different use-cases. That is, each is optimized for different applications.
Windows 10 (Fresh) + Atom IDE + apio
System/OS: VMWare Fusion V.M. running on Mac OS X 10.14.6 host: VM is Windows 10 (Home/Free/Dev) x64, fresh installation, except that ft_prog was also installed prior. This Windows installation sequence is presented here in the context of a fallback, if the Mac OS X tool chain installation and functionality is working completely or sufficiently (please …
MAC OS X 10.15 (Catalina) Fresh + Atom IDE + apio
This note came out of a few specific installations where the installation methods didn’t quite work to allow Atom IDE / apio-ide (package) to run its commands, like Verify, Build and Upload, etc.
HDL-0108-RSCPT: Firmware Updates
This is a quick post, just to begin by showing the correct connector orientations for firmware updates. For some background on hardware and tools for developing (including just updating) firmware, please also see: https://oshablue.com/bsides/2020/01/18/hdl-0108-rscpt-materials-for-getting-started/
HDL-0108-RSCPT: Getting Started
[Quick Note] Demo/experimental source code and builds at relevant repos at github: https://github.com/oshablue?tab=repositories [specifics and details below] Integration (Or First Tests) How to start working with the hardware, and what you might want to be able to start talking with it. The hardware will arrive already programmed, at least enough to get started with key …