As of now 7/5/24 with customer interface software with the DL0100A1, you can stream data in continuous acquisition mode with the higher (max override) transmit gains (Tx gains aka pulse voltages) using the following steps:
- Send Settings and PAC
- Set up the channel settings including the tx max gain override checkbox
- Click the button to actually send the commands and receive the WF
- Store Cur Chan Set RAM (Or make sure to check box Store Chan Set to RAM in Step 1)
- Make sure that the TxRx from RAM channel is set to match the desired channel(s) selected in Step 1
- Continuous Acquisition Start with Same Chan (Left) selected
- OPTIONALLY: You could stop Continuous Acquisition and verify the channel settings using the button Get Cur Chan Set (Active)