The DL0102GXN (“GXN”) can be configured for external HIVDC (Tx/pulse voltage) control. Here are the operating methods and parameters.
Category Archives: New Prototypes
DacqMan + RS104 (IS-Target / Low Energy)
Here’s the quick start guide on how to acquire data with DacqMan running the RS104 (IS-Target, Low Energy) UT Scanner. This guide here includes just the basic steps. Really, just a few clicks to start your scan runs.
Firmware Flash Cables
Software programming tools and the programming cable with an adapter, if needed, are used to update the firmware on the DL and HDL family hardware.
ADMPlex Integration
The ADMPlex interfaces directly on the DL0100A1 board, matching its form factor, and hosts up to four (4) separate ADMM client boards.
RS104 (HDL-0104-RS104): Starter Kit
The “RS104” (short for HDL-0104-RS104), an electronics hardware prototype, is a 4-channel rapid scan UT-for-NDT device targeting compact, isolated, low-energy point-of-application scanning that also requires wired connectivity.
HDL-0104-RS104: Wire-to-Board Connections (Power and Communications)
The HDL-0104-RS104 is a prototype 4-channel rapid scan ultrasonics-for-NDT board for embedded applications that includes RS-485 communications, additional circuit protection components, and an isolated design. This article covers the basics of wire to board connections.
HDL-0108-RSCPT: Batch Capture and Sample Rate
References In the DacqMan code repository please see the README file for the Custom User Batch Output and search for the paragraphs regarding sample rate. See also: capture-options.json, as well as relevant code in the source. The comments in this post are a summary of the details in the source code and configuration files in …
Continue reading “HDL-0108-RSCPT: Batch Capture and Sample Rate”
Exact Tx-Rx Timing in DL-Family Hardware
Examples of how to assess and change transmit pulse and receive signal timing in the DLITE0100A1 firmware. This is a “flash” post: very quick, draft. You can also probe signals, both digital and analog, at various points on the hardware to get a real-world assessment. Nominally, the Rx Delay implementation has an offset and scale …
Protected: Mobile Chair Accessory
There is no excerpt because this is a protected post.
DL0100A1 vs RS8 vs RS104: Comparison
These two 8-Channel and 1 4-Channel ultrasonic (UT) pulser-receivers for non-destructive testing (NDT) boards share several characteristics and also target very different use-cases. That is, each is optimized for different applications.